Skip to main content
Use this page when labels don’t print straight to the label printer through Connect, either from Digital Florists on the computer or from phones and tablets running the Digital Florists App. For other problems, start with Settings > Support > Status in Connect. For pairing, see Connect pairing problems.

Labels open in the browser on the computer

Labels should go straight to the label printer with no print dialog. When they can’t, Digital Florists opens them in a browser tab so you can still print them. Find what you see below. If a label went to Connect but didn’t print, such as a card message too long for one label, see When a label doesn’t print.

Send labels to Connect

  1. In Digital Florists, open Settings > Connect.
  2. Under Delivery labels, switch on Straight to the label printer. It applies to the shop chosen at the top of Digital Florists. If you have more than one shop, switch it on for each one.
  3. Reload Digital Florists on each computer that prints labels.
The dashboard’s Print button prints what Print for each order is set to. Set it to Label to print labels.

Check the browser can reach Connect

  1. Check Connect is open in the Windows system tray or Mac menu bar. Each computer that prints labels needs its own copy. See If Connect isn’t running.
  2. Allow Digital Florists in Site settings, below. If the browser blocks Digital Florists from reaching Connect, it says Connect isn’t running even when it is.
If labels still open in the browser:
Connect only takes labels from the shop it’s paired with, at the web address it was paired from. The shop’s name or address is at the top of Connect’s home screen. If it’s wrong, see Connect pairing problems.
If Printing port under Settings > Advanced Settings in Connect isn’t 3000, restart Connect and set the same Connect port on this computer’s till. A computer that isn’t a till needs port 3000. See Connect’s port was changed.

Allow Digital Florists in Site settings

Chrome asks before a website can reach apps on your computer, and blocks pop-ups until you allow them. If someone clicked Block or closed the question, labels open in the browser.
1

Open Site settings

On the Digital Florists page, click the icon to the left of the web address, then Site settings.
2

Allow Apps on device

Set Apps on device to Allow. In some versions it’s called Local network access. If you also see Local network, leave it as it is.
Chrome's Site settings with Apps on device set to Allow, below Local network set to Ask

Apps on device set to Allow.

3

Allow pop-ups

Set Pop-ups and redirects to Allow.
Chrome's Site settings with Pop-ups and redirects set to Allow

Pop-ups and redirects set to Allow.

4

Reload and print

Reload Digital Florists and print a label. If Chrome asks again, click Allow.
Repeat this in each browser, and for each computer login, that prints labels.

Phones and tablets can’t find the computer

In the app, Settings > Connect Printer says No Connect printers found on this network, or labels open the device’s own print screen instead of printing straight away.

Run the two-minute test

This tells you whether the problem is the computer and network, or the phone or tablet.
1

Update Connect

On the shop computer, open Connect, go to Settings > Updates and click Check for Updates. If it offers Restart and Install, click it. You need Connect 0.11.0 or later.
2

Find the computer's address

In Connect, go to Settings > Phone Printing and check Let the Digital Florists companion app reach this computer over Wi-Fi is ticked. Note the address under Use this address on phones and tablets, for example 192.168.1.20:3000.Addresses under Network Details lists every address the computer has. If there’s more than one, use the one whose first three numbers match the device’s address.
3

Check the device is on the same network

Find the phone or tablet’s IP address.
Open Settings > Network & internet > Internet on a Pixel, or Settings > Connections > Wi-Fi on a Samsung, and tap the gear beside your network. The IP address is there, sometimes under View more or Advanced. Names vary between phone makers.
The first three numbers should match the computer’s, such as 192.168.1.. If they don’t, see the guest Wi-Fi checks.
4

Open the address in the browser

On the phone or tablet, type http:// and the address, for example http://192.168.1.20:3000. The page is on your own network, so it’s fine to continue past a “not secure” warning.
Use Chrome. The address bar may say Not secure. If Chrome shows a warning page, tap Continue to site.
When the page opens, click Check This Computer in Connect. Last request from a phone or tablet then shows the time and the device’s address.

The browser opens the address, but the app finds nothing

On an iPhone or iPad, the app needs permission to reach devices on your Wi-Fi, even at a typed address. The browser doesn’t, which is why the test can pass. Android has no such switch for the app.Open Settings > Privacy & Security > Local Network and switch Digital Florists on. If it isn’t listed, close the app, open it again and tap Allow when asked. Check every device that prints.
Type the address under Use this address on phones and tablets into the app, without http://:
  1. In the app, open Settings > Connect Printer.
  2. Type the address under Manual host and tap Save host.
  3. Print a label from an order.
The screen still says No Connect printers found on this network. That’s expected. If the label prints with no print screen on the device, it worked. A typed address stops working if the computer’s address changes: see The computer’s address changed.
Discoverable on your network under Settings > Phone Printing > Network Details says whether devices can find the computer by themselves. No gives the reason in brackets. Typing the address into the app works either way.Some Wi-Fi extenders and mesh systems stop devices finding each other even when the browser test works. Type the address into the app.On Windows, Connect 0.10.x can only be found with Apple’s Bonjour Print Services installed. Update to Connect 0.11.0 or later instead.
The app prints to any computer with phone printing switched on under Settings > Phone Printing, and each needs a label printer chosen under Settings > Printers. Switch it off on computers that shouldn’t print labels. Every computer the app prints to needs the same phone code, if you use one.

The browser can’t open the address

Work through these in order, running the browser test again after each.
Devices can only print while the computer is awake and Connect is open in the Windows system tray or Mac menu bar.
Open Settings > System > Power & battery > Screen and sleep, and set When plugged in, put my device to sleep after to Never.
Keep Launch at login ticked under Settings > Advanced Settings. Connect stops when its user signs out or someone switches user. See If Connect isn’t running.
If the Check This Computer card under Settings > Phone Printing shows Windows may be keeping phones and tablets out, click Fix Network Access. Connect explains what it will change: click Fix Network Access again to go ahead, then choose Yes when Windows asks. Connect makes your network Private, removes any firewall rule blocking it and lets devices in. If Windows asks for an administrator’s password, someone who has one needs to enter it. Only make your shop’s own network Private.If that doesn’t fix it, sign in as an administrator and:
  1. In Settings > Network & internet, click Wi-Fi (or Ethernet), then your network (and Properties on Windows 10). Set Network profile type to Private network.
  2. Open Windows Defender Firewall with Advanced Security from the Start menu. Under Inbound Rules, delete each Digital Florists Connect rule with a red no-entry icon.
  3. In Windows Security > Firewall & network protection > Allow an app through firewall, click Change settings and tick Private beside Digital Florists Connect.
On a computer your IT team manages, ask them to allow Digital Florists Connect on the shop network.
  • Guest or customer Wi-Fi keeps devices apart on purpose. Join the network the computer uses.
  • An extender or second router can put devices on a network of their own. Join the main router’s Wi-Fi, or have the second router switched to access point mode.
  • Some routers, including many 4G routers, keep wireless devices apart. Plug the computer into the router with a cable, and turn off any wireless isolation setting.
Antivirus such as Norton, McAfee, ESET or Bitdefender can replace the Windows firewall. In its settings, mark your shop network as trusted, or allow Digital Florists Connect. To test, pause its firewall for a minute and run the browser test again.
A VPN on the computer or the device can keep them apart. Disconnect it, or turn on its option to allow local network access.
Open Settings > Network & internet > VPN on a Pixel, or Settings > Connections > More connection settings > VPN on a Samsung.

Labels open the print screen on the device

When the app can’t reach Connect, it offers to print from the phone or tablet instead.
The app says what went wrong, such as Connect printer unreachable. Open Android print prints on Android’s own print screen. After Connect print not confirmed, check whether the label came out first.
A label through Connect prints with no print screen on the device. If you see one, run the two-minute test.

Connect says it’s listening, but devices can’t connect

Check This Computer tests from the shop computer itself. This computer is ready or Listening on your network means Connect is answering, not that devices can get through a firewall or Wi-Fi. Run the two-minute test from the device, then check Last request from a phone or tablet: the device’s address there means the network is fine.

The app asks for a phone code

The phone code is an optional code Connect can require before accepting labels from devices. It’s under Settings > Phone Printing > Phone Code. It isn’t the pairing code from Settings > Connect in Digital Florists. In the app, open Settings > Connect Printer, paste the code under Connect access token and tap Save token. Last request from a phone or tablet in Connect also says when a device’s code didn’t match or was missing. While Require a phone code for companion app printing is ticked, a new code from Generate or Set Manually stops every device printing until it’s entered on them. Use Set Manually to share one code across several computers.

The label printer doesn’t print

The Connect Printer screen shows a line for each computer it finds. For labels from Digital Florists on the computer, see When a label doesn’t print.

The computer’s address changed

Your router can give the computer a new address after a restart or power cut, so an address typed into the app points nowhere. Give the computer a fixed address in your router’s settings, often called an address reservation or DHCP reservation, for the connection it uses. Your broadband provider can help. A replaced router can also turn the Windows network back to Public.

Connect’s port was changed

Connect uses port 3000 unless Printing port under Settings > Advanced Settings was changed. If it was:
  • in Digital Florists, open Settings > Connect, click Options on that till and set Connect port to match;
  • in the app, include the port, as Use this address on phones and tablets shows, such as 192.168.1.20:3100.
If Connect says Another program is using Connect’s printing port, quit any other copy of Connect or restart the computer.

Pairing Connect with your shop fails

See Connect pairing problems.

Still stuck? Send us your logs

See Send us your Connect logs.

What’s next?

Connect settings

Phone printing, the phone code and the printing port.

Send us your logs

What to send when these checks haven’t fixed it.
Last modified on October 29, 2026